How to Import RSS Feeds: URLs, OPML Files and Fixes
Updated · 15 min read

Listen to this post
Contents
- TL;DR
- Table of Contents
- What you are actually importing
- Step 1: Find the feed URL
- Step 2: Import a single feed
- Step 3: Import many feeds with an OPML file
- Before you import the file
- When an RSS import fails
- The address is wrong
- The feed is Atom, not RSS
- The feed is valid but your app still rejects it
- The OPML file is the problem
- The items are missing, not the feed
- Getting full articles, not excerpts
- Why importing is the easy part
- What this looks like for different readers
- A simple setup you can finish today
- Where Omphalis fits
- Our perspective
- FAQ
- What is the difference between an RSS feed URL and an OPML file?
- Will importing an OPML file bring my old articles with it?
- Why does my feed import say it cannot find a feed?
- How often do imported feeds update?
- Sources
- Recommended
To import an RSS feed, you give your reading app one of two things: the feed's own URL for a single source, or an OPML file for a whole list of sources at once. Everything else, from folders to refresh timing, follows from that choice. The harder part comes after the import. A feed that delivers fifty new items a day becomes a pile unless you can read, annotate and connect what arrives. That is the job we built Omphalis for: a place to save articles, papers, podcasts and videos, including content that comes in through feeds, and to read them with explanations and notes attached to the original passages.
This guide covers the mechanics first, because they decide whether your import works. Then it covers what to do with the stream once it is in.
TL;DR
- A feed URL imports one source; an OPML file imports many sources, with folders, in one step.
- Most failed imports come from a wrong URL (a homepage instead of the feed), a feed that is not valid RSS or Atom, or a file that exceeds your plan's limit.
- Importing is only step one. Decide up front what a feed is for, then save, annotate and export what matters.
- Omphalis accepts feeds along with PDFs, EPUBs and Word documents, so your research stream and your saved files live in one reading environment.
Table of Contents
- What you are actually importing
- Step 1: Find the feed URL
- Step 2: Import a single feed
- Step 3: Import many feeds with an OPML file
- When an RSS import fails
- Getting full articles, not excerpts
- Why importing is the easy part
- What this looks like for different readers
- A simple setup you can finish today
- Where Omphalis fits
- Our perspective
- FAQ
- Sources
What you are actually importing
Three terms get mixed up, and mixing them up is behind most beginner errors.
An RSS (or Atom) feed is a machine-readable page that a site publishes so other software can see its latest posts. It is the thing that updates. Blogs, journals, newsrooms, university departments and many podcasts publish one. Atom is a sibling format that does the same job; most readers handle both.
A feed URL is the web address of that machine-readable page. It is usually not the address you see in your browser's address bar when you read the blog. Pasting the homepage and hoping the app figures it out sometimes works and sometimes does not, as we explain below.
An OPML file is a list of feeds, saved as an XML file with an .opml or .xml extension. It does not contain articles. It contains pointers to many feeds, and often the folder structure you built in your old reader. If you have ever exported your subscriptions from another reader, you have an OPML file. Think of the feed URL as a single contact and the OPML file as an exported address book.
A file ending in .rss is a common source of confusion. Some people save a feed's raw content to disk and then try to load it as if it were a subscription list. Most apps expect either a live URL or an OPML list, not a saved copy of one feed.

Step 1: Find the feed URL
If you only want a handful of sources, collect their feed URLs. Buffer's help center lists four reliable ways to find one:
- Look in the site's footer or sidebar for a Subscribe or RSS link.
- Add /feed or /rss to the end of the domain. A WordPress site often answers at /feed, a Blogger site at /feeds/posts/default, and a Medium author at medium.com/feed/@username.
- Let a browser plugin or a reader's discovery tool detect it.
- View the page source, search for "rss", and copy the address that follows href=.
Copy the full address, including https://. A stray space or a missing letter is enough to break the import.
One caution for academic readers: journals often publish a feed per journal or per topic, and a university repository may publish one per department. Choose the narrowest feed that covers your question. A feed for an entire publisher will bury the three articles you wanted under three hundred you did not.
Step 2: Import a single feed
The pattern is the same across nearly every app. You open the area for adding sources, paste the URL, and confirm. In Buffer's content feeds, for example, you go to the Create tab, pick a Feeds collection, and choose Add Feed to paste the address, per its US support article.
A few habits save trouble:
- Paste the feed URL, not the homepage. Tools that detect a feed from a page depend on the site advertising its feed in its page metadata. SmarterQueue's help center notes that entering a general site address instead of the blog's address, or a blog without that metadata, is a common reason an import tool says it cannot find a feed.
- Check what the feed contains. Some feeds publish full articles; others publish a headline and an excerpt. If you plan to read inside your app, an excerpt-only feed means you will still need to open the original page.
- Name or sort it right away. A feed you cannot place in a folder on day one becomes noise by week two.
Step 3: Import many feeds with an OPML file
If you are moving from another reader, or you have a curated list from a colleague or a course, use OPML. You export the file from the old tool, then import it into the new one. Microsoft documents the flow for Outlook: open File, then Open & Export, then Import/Export, choose the option to import RSS feeds from an OPML file, browse to the file, and select the feeds you want, according to Microsoft Support. Microsoft also notes that you receive only new items from those feeds; the old items that sat in your previous reader do not come along.
That last point matters for researchers. An OPML import brings in your subscriptions, not your history. If an old reader holds articles you saved or highlighted, deal with those separately before you close the account, for example by exporting them or saving them as documents.
Before you import the file
- Confirm it is valid XML. Open the file in a text editor. It should start with an opml tag and contain outline lines, each with an xmlUrl value holding the real feed address. Lines with only a website address will not subscribe to anything.
- Trim it first. If you have 400 subscriptions and read 40, the other 360 will clutter your first week. Delete the dormant ones in the file or choose only some during import.
- Check plan limits. Many tools cap the number of feeds. Buffer's own limits, for instance, are three feeds on its Free plan and up to 50 on paid plans, and an OPML import that exceeds the cap will not complete, per its support article.
- Avoid doubling up. If you import the same list twice, and the tool merges rather than replaces, you can end up with duplicate feeds.
When an RSS import fails
Imports fail for a small set of reasons. Work through them in this order, from cheapest to most involved.
The address is wrong
Re-copy it. Open the URL in a browser tab: a working feed shows either structured text or a download prompt, not a normal web page or a 404 error. Buffer's troubleshooting advice starts here, then suggests testing the address in an external validator such as the W3C feed validator, and reminds readers that feeds must be RSS or Atom format (Buffer).
The feed is Atom, not RSS
Not every site publishes the format you expect. SmarterQueue suggests that when a blog's feed does not work, you try adding .atom to the blog link to find an Atom version (SmarterQueue). The same help page says that failures usually mean the feed contains invalid formatting that does not conform to the RSS standard, and it recommends the W3C Feed Validator as a check.
The feed is valid but your app still rejects it
This is the frustrating one. A feed can pass a standard validator and still fail in a particular app, because each app uses its own parser with its own tolerance for quirks. Themeisle's documentation for its WordPress feed plugin makes exactly this point: compatibility with the parsing library counts, not only standards compliance (Themeisle docs). If a feed is valid but will not load, try the Atom version of the same source, or a more specific category feed from the same site.
The OPML file is the problem
If a whole file fails, open it in a text editor. Look for a broken first line, odd characters from a bad export, or outlines that carry a site address but no xmlUrl. Re-exporting from the original reader is often faster than repairing the file by hand.
The items are missing, not the feed
New posts do not always appear instantly. Themeisle notes its plugin checks feeds every 60 minutes by default, or on the schedule you set, and recommends waiting 12 to 24 hours before concluding that posts are missing (Themeisle docs). Refresh timing varies by app. Buffer, for example, lets you refresh a feed manually with a refresh icon beside its last-refreshed timestamp (Buffer).
Getting full articles, not excerpts
An excerpt-only feed is a publisher's choice, not a bug in your import. Some publishers send the whole post; others send a teaser to pull you to their site. Themeisle's guidance for its plugin shows that even in publishing tools, full-content import is a separate capability available only on certain plans (Themeisle docs).
For a reader, the practical answer is to work from the article page itself. In Omphalis, content is cleaned and structured so you read the article rather than the page around it, and the browser extension for Chrome and Firefox lets you save a page you find in your feed without leaving the browser.
Why importing is the easy part
Importing a feed takes a minute. Keeping up with it is where readers give up. A feed turns a website into a conveyor belt, and the belt does not stop when you are busy. The usual outcome is a large unread count, a vague sense of guilt, and a quiet decision to mark everything as read.
Three habits prevent that.
Decide what each feed is for. A feed that tracks your thesis topic deserves attention. A feed that you subscribed to out of curiosity belongs in a separate folder you open on Friday afternoons. If you cannot say what a feed is for, do not import it.
Triage in one pass. Open the list, save what looks relevant, and skip the rest. Reading a stream and deciding whether to save are different jobs; do not try to read deeply while triaging.
Read what you save, with a pen in hand. Saving is not learning. A saved paper you never annotate is a bookmark. The reading list is only useful if you return to it and leave a trace: a highlight, a question, a one-line note in your own words.

What this looks like for different readers
Students often follow journal tables of contents and a few lab or department blogs. Import a short list, group feeds by course or chapter, and save only the papers that you will cite or discuss. Notes should stay with the passage they came from, so that three weeks later you can see why you wrote them. Our guide on research notebook templates shows how to turn reading notes into organized work.
Professionals curating insights follow industry newsletters, regulator updates and trade blogs. The goal is a small set of items per week that you can share or act on. Export highlights when you need to pass them to a team; we describe one approach in exporting highlights to CSV while keeping the source.
Podcast and video followers can bring in feeds from shows, then revisit key moments instead of re-listening to a whole episode. Our notes on annotating YouTube videos into study-ready notes and our transcripts category cover the workflow for spoken content.
Readers overwhelmed by long texts benefit most from reading with explanations on hand. When a paragraph is dense, you can ask for an explanation without leaving the document, as described on our page about explaining a hard paragraph in place.
If you are also moving a backlog from a read-later service, see our page on a home for your Pocket reading list.
A simple setup you can finish today
- Pick ten sources. Not a hundred. Choose the ones you have actually opened in the past month.
- Find their feed URLs using the four methods above, or export an OPML file from your current reader.
- Import and sort. Put each source in a folder named for its purpose, such as "thesis", "industry" or "listen later".
- Set a triage slot. Fifteen minutes, twice a week, is plenty for most people.
- Save, then read properly. Move the few items that matter into a space where you can highlight, annotate and ask questions with the source in view.
- Prune monthly. Remove any feed that produced nothing you saved.
Where Omphalis fits
Omphalis is built for people who save things to read later and then struggle to make use of them. It imports multiple formats, including PDFs, EPUBs, Word documents and feeds, so your feed items sit next to the papers and chapters you already have. From there you can read a cleaned, structured version of the content, get explanations of complex passages, keep your own notes attached to the original text, and ask questions that come back with citations from the source. Related content is connected, and you can organize work into notebooks and export it when you are done. Our highlights and notes page shows how a note reopens the passage it came from.
There is a Free plan, and paid plans include full features such as deep reading, PDF extraction, advanced listening and content import and export. Pro is $9 per month or $90 per year, Premium is $19 per month or $190 per year, and Scholar is $39 per month or $390 per year. Unit packs start from $10 one-off. Details are on the pricing page.

If your feeds are already imported and the unread count keeps climbing, start from the Omphalis home page and bring in the few sources that matter most.
Our perspective
Importing a feed is a solved problem. Paste a URL, or upload an OPML file, and the stream appears. What is not solved is what happens next.
We built Omphalis around a different idea of reading. Speed-focused summaries can leave you feeling you understand something you have not actually worked through. We would rather keep you with the full source, explain the hard passage where it sits, and let your own notes stay attached to the original words.
That is why we treat feeds as one more way into a reading environment, not as a destination. A feed tells you what is new. Reading, annotating and connecting ideas is how you make it yours. Structure, highlighted key points and connections across your saved material are there to help you retain what you read, so a good week of reading leaves you with something you can use.
Omphalis Team
FAQ
What is the difference between an RSS feed URL and an OPML file?
A feed URL points to one source and delivers its latest posts. An OPML file is a list of many feed URLs, often with folders, that you use to move subscriptions between apps. You subscribe to a feed, and you import an OPML file to subscribe to many at once.
Will importing an OPML file bring my old articles with it?
No, not usually. Microsoft's Outlook guidance states that you receive only new items from the imported feeds, and existing feed content is not imported (Microsoft Support). Save or export anything you want to keep from your old reader before you leave it.
Why does my feed import say it cannot find a feed?
Most often you pasted a homepage rather than the feed address, or the site does not advertise its feed in its page metadata. Try the footer link, add /feed or /rss to the domain, or look for an Atom version. If the address works in a browser tab but not in your app, the feed may use formatting that app's parser dislikes.
How often do imported feeds update?
It depends on the app. Some check about every hour by default, and many let you set a schedule or refresh by hand. If new posts do not show up, give it up to a day before assuming something is wrong, then refresh manually and check the feed in a browser.
Sources
- Using content feeds in Buffer
- Import a collection of RSS Feeds | Microsoft Support
- How To Solve Common Blog Or RSS Import Issues | SmarterQueue
- Feedzy Troubleshooting Guide | Themeisle Docs